Article number: | Q100006 |
Quantity in stock: | 9 |
When fitting new chain, the rear sprocket(s) should be replaced.
• 3/32” Chains can be connected with a PowerLink
• Do not use a connecting link to join wide 1/8” chains. Instead, use a standard chain tool
It is essential that this is correct. The chart below shows the number of links needed for different
chainwheel and sprocket combinations available from Brompton
Chain used on Bromptons is either wide (1/8") or narrow (3/32”)
• Use 3/32" chain when both chainring and sprocket(s) are 3/32"
• 1/8" chains should be used with 1/8" sprockets and chainwheels
• It is highly recommended that sprockets are replaced when fitting a new chain